Industrial Metal Products

i9Haynes 25 / L 605 Alloys

Approx Price: Rs 1,499 / Kilogram(s) 
Offering Haynes 25 / L 605 Alloys.
Haynes 25* / L605 Specification
*Trade name of Haynes International
  • W.NR 2.4964
  • UNS R30605
  • AWS 060
Applicable Standards:
  • AMS 5796
  • ASTM F90 
  • NACE MR0175 / ISO 15156-3

 

Contact Us...Product Range

Haynes 25/L605 is a Cobalt-Nickel-Chromium-Tungsten alloy that combines good high temperature strength with good resistance to oxidising environments up to 980oC (1795oF) for long exposures. It also has excellent resistance to sulphidation.

Good Mechanical Properties at Elevated TemperaturesYes
Corrosion Resistant at Ambient TemperaturesNo
Corrosion Resistant & Good Mechanical Properties at Elevated TemperaturesNo
Oxidation ResistantYes
Precipitation HardenableYes
Applications include:
  • Parts for gas turbine engines and bearings
Approximate Chemical Composition
Co51% max
Cr20%
W15%
Ni10%
Fe3% max
Mn1.5%
Properties
Density9.13 g/cm30.330 lb/in3
Melting point1410oC2570oF
Coefficient of expansion12.3 µm/m °C
(20 - 100°C)
6.8 x 1

Gun Metal

Approx Price: Rs 399 / Kilogram(s) 
85/5/5/5, 88/10/2, 90/10, Ingots, hollow, Bar, Bushes & Sheet, Strips, Wires etc. as per requirement

Following products are available in Gun Metal :
* Sheets 
* Rods
* Pipes
* Ingots
* Strips
* Flats

Nickel Alloys

Approx Price: Rs 699 / Kilogram(s) 
We are ISO 9001-2008 certifed company import, stockists and suppliers of high purity nickel alloys, ferro-nickel, soft-alloys, in form of shim, foil, sheet, strips, plates, wire, round, hax, tube, pipes, fitting, flanges, forgings, etc.

Nilo 42 Alloys

Approx Price: Rs 4,999 / kil 
Offering NILO 42 Alloys.
Nilo 42* Specification
*Trade name of Special Metals Group of Companies
  • W.NR 1.3917
  • UNS K94100
  • AWS 091
Applicable Standards:
  • ASTM F30 

 

Contact Us...Product RangeA Nickel-Iron, low expansion alloy containing 42% Nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 300oC (570oF).

 

 

 

Applications include:
  • Semiconductor lead frames
  • Thermostat rods
  • Various glass to metal seals
Approximate Chemical Composition
Ni42%
FeBAL

Nimonic - 90

Approx Price: Rs 1,999 / Kilogram(s) 
Offering Nimonic 90 Wire, Strips, Round, Profile.
imonic 90* Specification

Trade name of Special Metals Group of Companies
  • W.NR 2.4632
  • W.NR 2.4969
  • UNS N07090
  • AWS 030
Applicable Standards: 
  • BS HR 501 (Spring temper)
  • BS HR 502 (Solution Annealed)
  • BS HR 503
  • BS 3075 NA19
  • AMS 5829
  • NCK20TA
  • NACE MR0175 / ISO 15156-3

 

Contact Us...Product Range

A Nickel-Chromium-Cobalt alloy being precipitation hardenable, having high stress-rupture strength and creep resistance at high temperatures up to about 950oC (1740oF). It is widely used and a well proven alloy in high temperature conditions.

Good Mechanical Properties at Elevated TemperaturesYes
Corrosion Resistant at Ambient TemperaturesNo
Corrosion Resistant & Good Mechanical Properties at Elevated TemperaturesNo
Oxidation ResistantYes
Precipitation HardenableYes

Haynes 214 Alloy

Approx Price: Rs 1,999 / Kilogram(s) 
Offering Haynes 214 Alloy.
Haynes 214* Specification
*Trade name of Haynes International
  • W.NR 2.4646
  • UNS N07214
  • AWS 061
Applicable Standards:Contact Us...Product Range

Haynes 214 is a Nickel-Chromium-Aluminium-Iron alloy which is principally intended for use at temperatures of 955oC (1750oF) and above. It exhibits resistance to oxidation that far exceeds virtually all conventional heat resistant wrought alloys at these temperatures.

Good Mechanical Properties at Elevated TemperaturesYes
Corrosion Resistant at Ambient TemperaturesYes
Corrosion Resistant & Good Mechanical Properties at Elevated TemperaturesNo
Oxidation ResistantYes
Precipitation HardenableNo
Applications include:
  • Mesh belts
  • Trays and fixtures for the firing of pottery and china
  • The heat treatment of electronic devices and technical grade ceramics
Approximate Chemical Composition
Ni75%
Cr16%
Al4.5%
Fe3%
Mn0.5% max
Properties

904l 254 SMO Sanicro 28

Approx Price: Rs 999 / Kilogram(s) 
Offering 904L 254SMO SMO254 254 SMO SANICRO 28 Tubes Pipes.
We are Stockholder & Suppliers of Inconel Alloy 600, Inconel Alloy 601, Inconel Alloy 625, Inconel Alloy 718, Inconel Alloy X-750, Alloy 901, Waspaloy UNS N07001, Incoloy Alloy 800, Incoloy Alloy 800H, Incoloy Alloy 800HT, Incoloy Alloy 825, Incoloy Alloy A286, Alloy 904L, 254SMO, Sanicro 28, Monel Alloy 400, Monel Alloy K500, Hastelloy Alloy C276, Hastelloy Alloy C22, Hastelloy Alloy C4, Hastelloy Alloy B2, Nickel Alloy 200, Nickel Alloy 201, Titanium Grade-1, Titanium Grade-2, Titanium Grade-5, Ti6Al4V, Ti6Al4V ELI, 17-4PH, 15-5PH, 17-7PH, AISI 630, SUS630, Duplex UNS S31803 F51, Super Duplex UNS S32750 F53, Super Duplex UNS S32760 F55, Custom 450 XM-25, Nitronic 50 XM-19, Nitronic 60 Alloy 218, AISI 440C SUS440C in the form of Sheets, Plates, Bars, Rods, Tubes & Pipes, wire, Flanges, fittings, forgings, etc.
With EN10204 3. 1 Mill Certificate.
Make :
  • Sumitomo - Japan
  • Sandvik - Sweden
  • Special Metals - USA
  • DMV - France
  • Tubacex - Spain
  • Kobe - Japan
  • Daido - Japan
  • Sanyo - Japan
  • Mitsubhishi - Japan
  • ThyssenKrupp VDM - Germany
  • Industeel - France
  • Industeel - Belgium
  • Outokumpu - Sweden
  • Allegheny - USA
  • Carpenter - USA

Monel 400

Approx Price: Rs 1,999 / Kilogram(s) 

Monel 400 is a nickel-copper alloy that is hardened by cold working only. Monel 400 has low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400 also has excellent resistance to stress corrosion cracking in most freshwater. Monel 400 can be used in temperatures up to 1000 F. The 
alloy has great mechanical properties at subzero temperatures. Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.


Sheet/Plate :  ASME SB-127, AMS 4544 

Round Bar :  ASME SB-164, QQ-N-281 

Pipe :  ASME SB-165, ASME SB-829, ASME SB-775, ASME SB-725 

Tube :  ASME SB-165, ASME SB-163, ASME SB-730, ASME SB-751 

Fittings :  ASME SB-366 

Forgings :  ASME SB-564

Specifications

C.3 max
MN2.0 max
S.024 max
Si.5 max
Ni63.0 min
Cu28 - 34
Fe2.5 max

Inconel Alloys

Approx Price: Rs 1,499 / Kilogram(s) 
Offering Incoloy Alloys.
INCOLOY® Alloys The nickel alloys and cobalt alloys are highly engineered to offer a superior combination of heat resistance, high temperature corrosion resistance, toughness and strength for the most demanding applications. Following are the specification in which materials can be supplied against your requirement.
INCOLOY® alloy 800
INCOLOY® alloy 800H/800HT®
INCOLOY® alloy 803
INCOLOY® alloy 825
INCOLOY® alloy 832
INCOLOY® alloy 864
INCOLOY® alloy 890
INCOLOY® alloy 903
INCOLOY® alloy 907
INCOLOY® alloy 908
INCOLOY® alloy 909
INCOLOY® alloy 925
INCOLOY® alloy 945
INCOLOY® alloyMA956
INCOLOY® alloy DS
INCOLOY® alloy 020
INCOLOY® alloy 028
INCOLOY® alloy 330
INCOLOY® alloy 25-6HN
INCOLOY® alloy 25-6MO
INCOLOY® alloy 27-7MO 
INCOLOY® alloy A-286
in form of , foil, sheet, sheet, plates, flats, strips, wire, round, tube, pipe, fitting, flanges, forgings, etc

Inconel X 750

Approx Price: Rs 1,499 / Kilogram(s) 
Offering Inconel X 750 Wire, Round, Strips.
X750 is a Nickel-Chromium alloy made precipitation hard enable by additions of Al and Ti, having creep-rupture strength at high temperatures to about 700oC (1290oF). It is widely used for high temperature conditions but is not as strong as Nimonic 90. View X-750 Standard Stock Sizes Good Mechanical Properties at Elevated Temperatures Yes Corrosion Resistant at Ambient Temperatures Yes Corrosion Resistant & Good Mechanical Properties at Elevated Temperatures Yes Oxidation Resistant yes Precipitation Hardenable Yes Applications include: Nuclear reactors Gas turbines Rocket engines Pressure vessels Aircraft structure.

Nilo K

Approx Price: Rs 1,999 / Kilogram(s) 
Offering NILO K.
Nilo K* Specification
*Trade name of Special Metals Group of Companies
  • W.NR 1.3981
  • UNS K94610
  • AWS 094
Applicable Standards:
  • ASTM F15

 

Contact Us...Product RangeA Nickel-Iron-Cobalt, controlled expansion alloy containing 29% Nickel. Its coefficient of expansion (which decreases with rising temperature to the inflection point), matches the expansion rate of borosilicate glasses and alumina ceramics.

 

 

 

Applications include:
  • Glass to metal seals in applications requiring high reliability or resistance to thermal shock, ie. high power transmitting valves
Approximate Chemical Composition
Ni29%
Fe53%
Co17%
Properties
Density8.16 g/cm30.295 lb/in3
Melting point1450oC2640oF
Inflection point450°C840°F
Thermal conductivity16.7 W/m•°C116 btu•in/ft2•h°F
Coefficient of expansion6.0 µm/m °C
(20 - 100°C)

4.6-5.2 µm/m °C
(20 - 400°C)

3.3 x 10-6 in/in °F
(70 - 212°F)

2.6-2.9 x 10-6 in/in °F
(70 - 752°F)

Master Alloys

Approx Price: Rs 499 / Kilogram(s) 
d
escription/ Specification of Master Alloys
Aluminium based master alloys
Copper based master alloys
Nodularising alloys for the cast iron industry
Additives for the iron, steel and superalloy industry
Zinc based master alloys
Lead based master alloys
Special alloys
Alloys
Aluminium Bronze
Antimonial Lead
Beryllium Copper Alloys
Brass Brazing Alloys
Copper Alloys
Ferro Alloys
Ferro Chrome
Ferro Silicon
High Copper Alloys
Lead Alloys
Metal Alloys
Nickel Copper Alloys
Non Ferrous Alloys
Phosphor Bronze Alloys
Tellurium Copper
Tin Alloys
Titanium Alloys
Zinc Alloys
Zirconium Alloys
Aluminum-Molybdenum-Vanadium-Titanium
Aluminum-Chromium-Molybdenum-Tin-Titanium-Zirconium (Ti-17)
Aluminum-Tin-Titanium-Vanadium
Aluminum-Tin-Titanium
15% Aluminum-85% Vanadium
15% Aluminum-85% Vanadium (Non-Aerospace)
25% Aluminum-75% Vanadium (High Nitrogen)
30% Aluminum-70% Chromium
35% Aluminum-65% Molybdenum
35% Aluminum-65% Vanadium
35% Aluminum-65%Vanadium (with Ruthenium)
35% Aluminum-65% Vanadium (Non-Aerospace)
40% Aluminum-60% Zirconium
40% Aluminum-60% Niobium
45% Aluminum-55% Molybdenum-Titanium
50% Aluminum-50% Silicon
50% Aluminum-50% Vanadium
60% Aluminum-40% Vanadium
40% Nickel-60% Vanadium

Ferro Niobium Powder
Ferro Niobium Vacuum Grade
Nickel Niobium Powder
Nickel Niobium Vacuum Grade
20% Aluminum-80% Chromium
30% Aluminum-70% Chromium
44% Aluminum-56% Chromium
60% Aluminum-40% Chromium

Multimet Alloy

Approx Price: Rs 499 / Kilogram(s) 

Offering Multimet N155 alloy



Sheet/Plate

AMS 5532

Round Bar/WireAMS 5768, AMS 5769, AMS 5794, AMS 5795

C.08 - .16
MN1.0 - 2.0
P
S
Si1.0 max
Cr20.0 - 22.5
Ni19.0 -21.0
Mo2.5 - 3.5
Cu
Co18.5 - 21.0
Cb
Ti
Al
N.10 -.20
W2.0 - 3.0
Cb + Ta.75 - 1.25

Alloy Al6xn Pipe

Approx Price: Rs 149 / Kilogram(s) 

Offering Alloy pipe Al6xn


 
Sheet/Plate

ASME SB-688

Round Bar/WireASME SB-691
PipeASME SB-312, ASME SB-358
TubeASME SB-269, ASME SB-270

C.03 max
MN2.0 max
P.04 max
S.03 max
Si1.0 max
Cr20.0 -22.0
Ni23.5 - 25.5
Mo6.0 - 7.0
Cu.75 max
Co 
N.18 - .25
Ti 
Al 
Febal
 

Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Magellan is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help

Phosphor Bronze

Approx Price: Rs 299 / Kilogram(s) 
Phosphor Bronze, more accurately described as Tin Bronzes, are alloys of copper where tin is the main alloying element with phosphorus added primarily as a deoxidant. Alloys containing up to about 9% tin are wrought. Alloys containing from about 10-12% tin are used as-cast. They are strong, corrosion resistant alloys with many traditional uses in marine environments and in electrical and electronic engineering where their especially at the higher cast level, imparts good wear resistance for traditional use in bearing components.

Different Types:

  • BS 2870 / BS 2875
  • PB 103 - BS 2874
  • PB 102 - NES 838 BS 2874
  • PB 104/ BS B 24 (DTD 265 A*) (Colbronze) - BS 1400
  • PB 1 ASTM B 139 : C 54400 (Colphos 90)

Leaded Bronze Alloys

Approx Price: Rs 299 / Kilogram(s) 
Offering leaded bronze alloys.
Leaded bronze alloys: presenting an array of leaded bronze alloys, leaded bronze rods, leaded bronze hexagons, leaded bronze bars that are developed from highest quality of materials under the supervision of expert engineers. The leaded bronze alloys are known for their resistance towards corrosion, abrasion and their long service life. Our expertise in the industry enables us to provide the range in undermentioned grades and composition, suitable for variegated industrial.
 

310 Stainless Steel

Maraging C350

Approx Price: Rs 4,999 / Kilogram 
Maraging C350/vascomax 350 Round Bar & Components, flanges and forgings :
Maraging 350 Maraging C350 Vascomax C350:

Maraging C350™ is a nickel-maraging alloy. Maraging C350™ is a relatively soft but tough material, therefore, readily machined and formed. The aging process of Maraging C350™ raises the hardness to a level sufficient for many tooling applications. Typical applications of maraging steels are missile and rocket motor cases, wind tunnel models, landing gear components, high performance shafting, gears and fasteners.

Soft Magnetic Alloy

Approx Price: Rs 129 / Kilogram(s) 
Offering Hiperco 501 Soft Magnetic Alloy: 

Hiperco 501 is an alloy of 49% Cobalt, and 2%Vanadium, balance Iron. This alloy exhibits the highest magnetic saturation of any commercial alloy and excels in applications where this attribute is needed. This alloy has higher mechanical strength than other soft magnetic alloys.

Hiperco 50 Products

EXCEL stocks Hiperco 50 in a variety of forms and dimensions. Below are some of the standard stock form/sizes. If you do not see the size or form of Hiperco 50 that you require, please call one of our materials experts; our sales people are very knowledgeable and can assist you. We can cut, slit, shear, or center less grind Hiperco 50 to your exact specifications, and we also have tremendous versatility when it comes to custom sizes, packages, and unusual materials.


Hiperco Strip/Coil

Hiperco Strip/Coil Thickness

Hiperco Strip/Coil Thickness

0.050 mm Hiperco Strip/Coil

0.508 mm Hiperco Strip/Coil

0.101 mm Hiperco Strip/Coil

0.635 mm Hiperco Strip/Coil

0.152 mm Hiperco Strip/Coil

0.762 mm Hiperco Strip/Coil

0.254 mm Hiperco Strip/Coil

1.270 mm Hiperco Strip/Coil

0.355 mm Hiperco Strip/Coil

 

 

Hiperco Rod

Hiperco Rod Diameter

Hiperco Rod Diameter

22.225 mm Hiperco Rod

43.180 mm Hiperco Rod

36.525 mm Hiperco Rod

44.450 mm Hiperco Rod

Inconel 800

Approx Price: Rs 1,499 / Kilogram(s) 
We offer wide range of Inconel 800 Products
Incoloy 800 HT Rod
Inconel 800 HT Plate
Inconel 800 HT Sheet
Inconel 800 HT Tube
Inconel 800 Wire
Inconel 800HT Bolt
Incoloy 800.

Duranickel Nickel Alloys

Approx Price: Rs 1,499 / Kilogram(s) 
Offering Nickel/Duranickel ® Alloys. The time-tested nickel alloys and cobalt alloys are highly engineered to offer a superior combination of heat resistance, high temperature corrosion resistance, toughness and strength for the most demanding applications. Following are the specification in which materials can be supplied against your requirement.
Nickel 200
Nickel 201
Nickel 205
Nickel 212
Nickel 270
DURANICKEL® alloy 301

15-5 PH Stainless Steel

Approx Price: Rs 129 / Kilogram 
Offeirng Stainless Steel ( 17-5 PH ) Round Bar, Wire, Flats & Plates.
Stainless Steel ( 17-5 PH )

Before discussing 17-5 PH it would be worthwhile to give a brief description of Precipitation hardening stainless steels. Precipitation hardening stainless steels are primarily chromium and nickel containing steels which gives an optimum combination of the properties of martensitic as well as austenitic grades. Similar to martensitic grades, they are well known for their exceptional ability to gain high strength through heat treatment. 
. Typical applications include:
  • Gears
  • Valves and other engine components
  • High strength shafts
  • Turbine blades
  • Molding dies
  • Nuclear waste gasket.

17-4 PH Stainless Steel

Approx Price: Rs 199 / Kilogram 
Offeirng Stainless Steel ( 17-4 PH ) Round Bar, Wire, Flats & Plates.
Stainless Steel ( 17-4 PH )

Before discussing 17-4 PH it would be worthwhile to give a brief description of Precipitation hardening stainless steels. Precipitation hardening stainless steels are primarily chromium and nickel containing steels which gives an optimum combination of the properties of martensitic as well as austenitic grades. Similar to martensitic grades, they are well known for their exceptional ability to gain high strength through heat treatment.
Further they also display corrosion resistance of austenitic stainless steel. The high tensile strengths of precipitation hardening stainless steels develops after it passes through a heat treatment process leading to precipitation hardening of a martensitic or austenitic matrix.
Among the types of precipitation hardening steel the most well known is the is the 17-4 PH. The name 17-4 PH is due to the additions of 17% Chromium and 4% Nickel. 17-4 PH also contains in it 4% Copper and 0.3% Niobium. 17-4 PH is also known by another name and that is stainless steel grade 630.
Application of 17-4 PH Owning to the high strength of 17-4 PH(precipitation hardening stainless steels) most applications are found in aerospace and other high-technology industries. Typical applications include:
  • Gears
  • Valves and other engine components
  • High strength shafts
  • Turbine blades
  • Molding dies
  • Nuclear waste gasket.

310 Stainless Steel

Approx Price: Rs 349 / Kilogram(s) 

310 Stainless Steel . These products are manufactured with the help of advanced machinery. Owing to their accurate dimensions and sturdy design, these products are availed by a huge client base. Our customers can make use of these products in construction applications.

Features:

  • High strength
  • Dimensional accuracy
  • Corrosion resistanc

Copper-Nickel Alloys

Nimonic Alloys

Approx Price: Rs 999 / Kilogram(s) 
Offering NIMONIC® Alloys
The time-tested nickel alloys and cobalt alloys are highly engineered to offer a superior combination of heat resistance, high temperature corrosion resistance, toughness and strength for the most demanding applications. Following are the specification in which materials can be supplied against your requirement.
NIMONIC® alloy 75
NIMONIC® alloy 80A
NIMONIC® alloy 81
NIMONIC® alloy 86
NIMONIC® alloy 90
NIMONIC® alloy 91
NIMONIC® alloy 105
NIMONIC® alloy 115
NIMONIC® alloy 263
NIMONIC® alloy 901
NIMONIC® alloy PE11
NIMONIC® alloy PE16
NIMONIC® alloy PK33

Aerospace Alloy

Approx Price: Rs 499 / Kilogram(s) 
Aerospace Alloy

High-strength Alloy Steels

High Strength Alloys

Approx Price: Rs 699 / Kilogram(s) 

his alloy has the highest mechanical strength of all aluminium alloys and matching that of certain steels. It is commonly used in aerospace, high precision engineering, motorsport applications, ordnance, prosthetics and sports equipment.

7068 Aluminium zinc Alloy

This is an extra-high strength aluminium alloy extruded bar. An aluminium-zinc alloy combining the strength of steel with good corrosion resistance (similar to 7075 alloy).

Developed in the mid 1990’s by a world renown aluminium producer, and exclusively stocked and supplied in Europe by Advanced Metals International, 7068 alloy is designed as a higher strength alternative to 7075 for ordnance applications. The highly attractive overall combination of mechanical properties (retained at elevated temperatures better than 7075) and other important characteristics of 7068 have resulted in the widespread specification of the alloy to markedly reduce the weight/cross section or significantly increase the strength of critical components in diverse market sectors.

7068 alloy provides the highest mechanical strength of all aluminium alloys and matches that of certain steels. This outstanding alloy combines a yield strength of up to 700 MPa (up to over 30% greater than that of 7075 alloy) and good ductility with corrosion resistance similar to 7075 and other features beneficial to high performance component/equipment designers.

7068 alloy is a 7000 series aluminium-zinc alloy registered with the US Aluminium Association and produced to AMS 4331 (chemical composition and mechanical properties) and AMS 2772 (heat treatment). 7068 alloy ‘A’ and ‘B’ tensile data and fatigue properties have been ratified for inclusion in MIL Handbook 5 / MMPDS. The standard supply temper condition is T6511. For applications requiring greater resistance to stress corrosion cracking the T76511 condition is available to order.

Maraging Steel 350

Approx Price: Rs 3,999 / Piece(s) 
Maraging refers to a crystalline tempered steel, Martensite, that is created through an aging process. When aging is used, steel is forced to cool from its molten state to its solid state over a prolonged period of time. The result is a metal that is harder and stronger than it would be had the steel been allowed to cool at a natural rate.

Maraging 350 is an alloy that has become an integral material in the airplane and aerospace industries. Due to its strength and its ability to withstand extreme conditions including frequent and sudden changes in speed and temperature, Maraging 350 is used in the production of rocket motor cases, takeoff and landing gear, and certain munitions created by defense companies. Maraging 350 also has uses in less drastic applications such as die casting and high-performance shafting.

There are few metals companies that carry Maraging 350 and other related alloys. Only those that have the capability to work with leaders in aerospace, aircraft design, and defense will have a viable stock of maraging steels on hand. All Metals & Forge has worked with these types of companies since its inception, and it continues to supply them with the Maraging 350 and other hard-to-find alloys that are crucial to their respective industries.

You will also find that All Metals & Forge is one of the most effective sources for information on maraging steels and the aging process that creates them. This AS9100- and ISO9001:2000-certified company has created an online database that serves as a source on countless metallurgical subjects

Brass Products (Copper, Zinc Alloys Products)

Approx Price: Rs 299 / Kilogram(s) 

Copper Brass, Brass Strips, Brass Circles, Copper Sheets, Copper Strips and Copper Ingots.

*Gilding Metal  * Commercial Bronze * Red Brass* Low Brass* Yellow Brass *

 We believe in providing our clients with the most durable and superior quality products at very reasonable rates. We assure our clients that the raw materials that we procure are of the optimum quality purchased from genuine dealers. Recently we are manufacturing copper brass sheets of 3.5mm thick to 00.1mm. Our copper brass is highly used in areas like radiators, electrical accessories and many other industries.  

Brazing Filler Metals

Approx Price: Rs 399 / Kilogram(s) 
Offering Precious Brazing Filler Metals 

The extensive range of high purity, low vapor pressure Precious Brazing Filler Metals offered by MTC Wesgo Metals is derived from Gold, Silver, Platinum and Palladium based materials, and exceeds the most stringent requirements imposed by the Power Tube, Aerospace, Semiconductor, Medical, Electronic and Vacuum industries in which they serve. The table lists the major alloys available, and the forms produced include sheet, wire, paste, powder and preforms.

Precious Brazing Filler Metals
Available forms: foil, flexibraze, wire, powder, extrudable paste and preforms.

Inconel Alloy 617

Approx Price: Rs 499 / Kilogram(s) 
Offering Inconel Alloy 617.
ALLOY 617 _ UNS N06617
Common Trade Names :Inconel 617®, Nicrofer 5520®
Inconel 617® consists of nickel-chromium-cobalt and – molybdenum. These elements make Inconel 617® highly resistant to oxidation and carburization. Inconel 617® can be easily fabricated; it can be hot formed up to 2200º F, and cold formed at 1900º F. Inconel 617® has excellent weld ability. Inconel 617® is used for ducting, transition liners in both aircraft and land based gas turbines, and combustion cans.Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.


Sheet/Plate : ASME SB-168, AMS 5888, AMS 5889
Round Bar : ASME SB-166, AMS 5887
Forgings : ASME SB-564, AMS 5887

Chemical Analysis


C.05 -.15
MN1.0 max
S.015 max
Si1.0 max
Cr20.0 -24.0
Ni44.5 min
Mo8.0 - 10.0
Cu5 max
Co10.0 15.0
Ti0.6 max
Al8 -1.5
Fe3.0 max
B.006 max

Inconel 625

Approx Price: Rs 999 / Kilogram(s) 

Alloy 625
Chemical Composition %

CCrFeNiAlTiCo TA
MaxMaxMinMaxMax
0.1020.0-23.05.058.00.400.403.15-4.15


Availability:

 

  • Welded Pipe 1/2" - 8"
  • Butt Weld Fittings 1/2" - 8"
  • Flanges 1/2" - 8"
  • Bar 1" - 4-1/2"


Specification:

 

  • ASTM 8443, 8705, B366, B446, B564
  • ASME SB443, SB705, SB366, SB446, SB564

Inconel 625 Rod

Inconel 625 Plate

Inconel 625 Sheet

Inconel 625 Tube

Inconel 625 Pipe

Inconel 625 Fitting

Inconel 625 Wire

Inconel 625

Incoloy 800

Approx Price: Rs 499 / Kilogram(s) 
Offering Incoloy 800/800H/800HT

Sheet/PlateASTM B409, AMS 5877, BS 3072NA15, BS 3073NA15, VdTüV 412 & 434, DIN 17460, EN 10028-7, EN 10095
Round Bar/WireASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434
Pipe & TubeASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751, BS3 3074NA15, ISO 6207, DIN 17459, VdTüV 412 & 434
FittingsASTM B366
ForgingsASTM B564, AMS 5766, ISO 9725
Weld WireAWS A5.11 ENiCrFe-2, AWS A5.14 ERNiCr-3

Nitronic Products

904L Stainless Steel

Approx Price: Rs 149 / Kilogram(s) 

The offered range of Stainless Steel Pipe are highly in demand for their unmatched quality and unbeatable price. With due consideration to the varied requirements of our valuable clients, we have made the offered products in different sizes and specifications.

Features:

  • Longer service life
  • Resistance against corrosion
  • Dimensions stabilit

Looking for Industrial Metal Products ?
© Excel Metal & Engg Industries
 
Desktop Site Back to top